Here are nine surefire way of caring for your dream home such as cleaning the crust in the bathroom, fixing floor tiles cracked / loose, fix a wet or damp floors, repairing a leaking bathroom floor, painting the walls so as not easy to peel, when necessary to repainting, nailed to the wall so as not to crack, keeping doors and window frames to be free of termites, and eradicate the fungus in the house.
So if you want considered to have a pleasant expression of the soul, get your grammar and residential care by following these tips and tricks:
1. Cleaning the crust in the bathroom
Bathroom floor of a yellow-brown crust can be removed in the following way: The crust is rubbed repeatedly with pumice soap and water, then rinsed with clean water. Citroenzuur (citric acid) was sown on the outside and inside walls or foundation that has been soaked in a bath before, let the citric acid react for one hour. Then, brushed and flushed with clean water and rinsed until completely clean. Furthermore, dry with a dry cloth. Citric acid is often called citron in the form of white powder can be obtained in stores supplies cake.
2. Fixing floor tiles cracked / loose
Cracked floor tiles removed carefully so that the ceramic is still intact does not come apart. Nat scraped with a sharp object. After the pair removed or broken floor to the bottom, made the bottom floor, then a replacement floor tile installed.
If the damaged tile grout, grout is cleaned first by scraping. Then grout flush with clean water. Furthermore, the gap is filled with grout rather liquid mixture and let it soak up into. At the time the field was still half-dry, followed by a more viscous mixture and pressed to a solid. Prior to the entry and drying, the remnants of filling material scattered on the surface of the floor wiped with a dry cloth.
3. Fixing a wet or damp floors.
Improvements on a wet or damp floor is actually quite easy from unknown causes. If the infiltration of water into the surface of the floor go through the grout, grout covered with waterproof material. If it happens on the ground that are not watertight, the entire floor is wet and humid is dismantled down to the bottom urugan sand. Above urugan sand is coated with a plastic sheet on it and then coated with a mixture of water-resistant species with a ratio of 1 cement: 2 sand 3 cm thick. The floor is ready to be installed again.
4. Fix a leaking bathroom floor.
Leaks in the bathroom in the house usually comes from tile grout. Nat often eroded by water, cleaning chemicals, soaps, or how to install tile in bathrooms that are less precise. You must know first whether the ceramic is attached properly to the floor by floor or stepped on with a little pressure tapped. If it sounds loud means there is a gap or cavity is empty.
5. Paint the walls in order not easy to peel.
So that the layer of paint on the walls is not easy to peel it plamur use should be limited only as cover cracks in the walls of fine hair. Often we make a mistake that is using plamur as a base coat of paint. Plamur material is not made to bind the paint so that if it continues to be used in the process of painting, the paint will easily peel. When painting on the wall should be chosen carefully.
If a painting done on wet conditions, the paint will take longer to dry. Similarly, if a painting done on the sun is very hot conditions, the results are less good. Results of painting on the outside (surface of the wall) will dry up earlier than the inside. This potentially causes the paint cracks, bubbles or peeling. The ideal time to do the painting was in dry conditions and not when the sun is very hot.
6. When necessary to repainting?
Repainting should be done if we find the walls of the house was calcifying. The signs can we know with menyaapukan palms on the wall surface. If we get the former white powder means the walls need to be painted again.
7. How to nail the wall so as not to crack.
Often we nailed wall frames for pocket or household accessories, but we find dingding be cracked. This happens not because the mixture of species that are less good but because we do not know how to nail the right wall. The trick is to give the tape cross on the wall before nailing the wall surface, and then nailed to crosses in the middle of the tape earlier. Once completed, the tape is released slowly as needed.
If the wall material of less quality, so if nailed, the wall will fall. How to fix remedy is to pour two to three tablespoons of vinegar on the walls who want nailed. Wait until dry and then the wall can be nailed.
8. Keeping doors and window frames to be free from termites
You do this by mixing 3 and 1 diesel oil and then stir until blended. The mixture is applied evenly throughout the surface of the wood and diesel oil until the mixture is completely dry. Once that was done painting on wood surfaces. Can also be painted before, wood surfaces coated with anti-fungal medication to prevent attacks from termites.
9. Eradicate the fungus in the house.
To overcome the mild mushroom and has recently attacked parts of the house on the walls and ceilings or even furniture, can be used vinegar, fungicides (fungus killers) or a liquid disinfectant. The trick, vinegar soaked rag, added to the part that fungus slowly so that no mold spores flying everywhere. Sweeping repeated with vinegar and a new cloth. Brush is not recommended for cleaning the mold because it will make the spores spread to other places, for example attached to the furniture, sofa or inhaled by humans.
If the fungus attacks the long and quite heavy, for example on the ceiling caused by leaks, and leaks repaired promptly replaced or repainted ceiling. Installation of sanitation also needs to be guarded from damage and leaks in order not to be the cause of the emergence of the fungus.
Tidak ada komentar:
Posting Komentar